HPE J9778A - Aruba 2530 Network Switch of Aruba 2530 48 PoE+ Ethernet Switch J9778A
SPECIFICATIONS
Brand Name: HPE
Type: IDE Cables
Products Status: Stock
Ports: 48
Transmission Rate: 10/100/1000Mbps
Function: LACP, POE, QoS, SNMP, Stackable, VLAN Support
Communication Mode: Full-Duplex & Half-Duplex
Switch Capacity: 17.6
Brand Name: Juniper
Model Number: J9778A
Modle: J9778A
Name: gigabit switch
Detail: Aruba 2530 48 PoE+ Switch
Switching capacity: 17.6 Gb/s
PoE power: 382 W
Minimum dimensions (W x D x H): 44.2 x 32.26 x 4.45 cm
Weight: 4.58 kg (10.1 lb)
MOQ: 1 PC
Warranty: 1 year
Product Description
HPE J9778A Aruba 2530 Network Switch of Aruba 2530 48 PoE+ Ethernet Switch J9778A, 48 x 10/100 PoE+ ports with a power budget of 382W, 2x SFP
HPE J9778A - Aruba 2530 Switch
Aruba 2530 Series Fast Ethernet devices are fully managed Layer 2 edge switches delivering cost effective, reliable, and secure
connectivity for business networks. This J9778A has 48 x 10/100 PoE+ ports with a power budget of 382W. Additionally the switch has two 10/100/1000 ports and two dedicated Gigabit SFP ports. Designed for entry level to midsize enterprise networks, these
switches deliver full Layer 2 capabilities with enhanced access security, traffic prioritization, and IPv6 host support.
J9778A
Specifications |
|
|
Type |
Aruba 2530-48-PoE+ Switch |
|
System specifications |
|
|
Ports |
· 48 × RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3at PoE+); |
|
Memory and processor |
Processor: ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 3 MB dynamically allocat. |
|
Mounting |
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); horizontal surface mounting; wall |
|
Management |
IMC - Intelligent Management Center; command-line interface; Web browser; configuration menu; out-of-band management (serial |
|
Performance (IPv6 Ready Certified) |
|
|
1000 Mb latency |
< 2.2 µs (LIFO 64-byte packets) |
|
100 Mb Latency |
< 6.6 µs (LIFO 64-byte packets) |
|
ThrougArubaut |
Up to 13 million pps (64-byte packets) |
|
Switching capacity |
17.6 Gb/s |
|
MAC address table size |
16000 entries |
|
Physical specifications |
|
|
Dimensions (W x D x H) |
44.2 x 32.26 x 4.45 cm (17.4 x 12.7 x 1.75 in) (1U height) |
|
Weight |
4.58 kg (10.1 lb) |
|
Electrical specifications |
|
|
Maximum heat dissipation |
170 BTU/hr (179.35 kJ/hr), (switch only: 170 BTU/hr; combined switch + max. PoE devices: 1505 BTU/hr). |
|
Voltage |
100 - 127 / 200 - 240 V ac |
|
Current |
5.2/2.6 A |
|
Idle power1 |
37.5 W |
|
Maximum power rating2 |
441 W |
|
PoE power |
382 W |
|
Frequency |
50/60 Hz |
|
Environmental specifications |
|
|
Operating temperature |
0° to 45°C (32° to 113°F) |
|
Operating relative humidity |
15% to 95% @ 40°C (104°F), noncondensing |
|
Non-operating/storage temperature |
-40° to 70°C (40° to 158°F) |
|
Non-operating/storage relative humidity |
15% to 90% @ 65°C (149°F), noncondensing |
|
Altitude |
Up to 3 km (10,000 ft) |
|
Acoustic |
Power: 31.8 dB, Pressure: 37.9 dB |
|
Safety agency certifications |
|
|
Safety |
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1 |
Product Code |
J9774A |
J9777A |
J9778A |
Type |
Aruba 2530-8G-PoE+ Switch |
Aruba 2530-8G Switch |
Aruba 2530-48-PoE+ Switch |
Ports |
· 8 × RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type |
· 8 × RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); |
· 48 × RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3at PoE+); |
Switching capacity |
20 Gb/s |
20 Gb/s |
17.6 Gb/s |
PoE capability |
67W |
N/A |
382 W |
Inventory Last Updated: Jan 14, 2025