COMFAST 2pcs 300Mbps 1KM Outdoor Wireless AP Bridge 2.4Ghz WiFi CPE Long Range 2*12dBi WiFi Antenna POE Nanostation Router
Product Description:
CF-E315D is a wireless bridge working in the 2.4GHz frequency band. It is suitable for the transmission of wireless signals in security monitoring projects. It has the characteristics of flexible and convenient installation, simple settings, and stable transmission.
Features:
1.MTK7628KN chip solution;
2.Comply with IEEE802.11b/g/n standard;
3.2.4Ghz- 2.7Ghz broadband, more frequency band options to avoid co-channel interference;
4.Built-in 2* 12dBi large area gain antenna, wide transmission and reception rate;
5.300Mbps wireless transmission rate; IEEE802.11b/g/n;
6.1*10/100Mbps WAN/LAN RJ45 Ethernet port, 1*10/100Mbps LAN/LAN RJ45 Ethernet port, 1*RESET/Digital Switch, 1*AP/STA switch, 1*DC Power supply
7.The signal strength indicator light can intuitively understand the working status of the equipment, and it is convenient to align the angle during installation;
8.Digital display on the back, dial code pairing is more intuitive
9.Support POE power supply, flexible and convenient;
10.The project installation is simple and convenient;
11.Imported ABS material, simple appearance;
12.Convenient for outdoor installation, easy to dismantle and use;
13.Outdoor safety protection, suitable for wind, frost, rain and snow;
Suggestion:
The distance "1KM" means 2pcs CPE based on point to point bridge mode with no obstacles environment.
The Antennas need pairing, so 2pcs are required
There are many factors that affect distance, such as obstacles (trees, walls, buildings, trucks, etc.), raw network signals, etc
Package includes:
2*Wireless bridge
2*stainless steel cable tie
2* Poe Adapter
2*instruction manuals
2 power Cables
2 Warranties
Digital pairing, quick setup
The bridge project no longer needs to bring a computer, and the hardware solves the tedious problem of setting.Outdoor Point to Point Wireless Transmission
CF-E315D wireless transmission distance can reach to 1km, professionally solve outdoor point to point, point to multi-point long distance wireless transmission and coverage problems.Comprehensive protectionfor outdoor application
Precise structural design provides the ability to handle different kinds of rugged surrounding.3 modes for selection
flexible application
Meet the needs of outdoor wifi engineering applications.
1. Bride Mode
2. AP Mode
3. Router ModeNote: When the signal strength is very weak, the device may be misaligned or the distance is too far. Please adjust the device according to the signal indicator.POE Power Supply
Support 9V~24V POE and DC two power supply ways. we can select the suitable power supply way according our demands.Transmission power is adjustable, which can reduce mutual interference
The transmission power is linearly adjustable. We can reasonably adjust the transmission power of the wifi bridges according to the actual environment, reduce the mutual interference between the wifi bridges, and improve the stability of wireless transmission.Low Temperature Protection
The device can support work and start up under low temperature.Wireless CPE Security monitoring application
01 / Point to Point Connection Diagram
Multiple cameras connection way 1: Connection the cameras to the switch, then connect with the COMFAST CPE.It will transmit the data through two CPE.02 / Muti-point to Muti-point Connection Diagram
Multiple cameras connection way 2: If the distance among the cameras is so far ,each camera is configured with two CPEs. The control center connect CPE with AP mode through the switch,then connect with the NVR03 / Point to Muti-point Connection Diagram
If the angle of camera and monitor center is less than 60degree,there can consider one point to multi point connection.t can reduce CPEs with the transmitting mode,which can save project cost a lot.Pls pay attention that it has to meet the angle and Broadband requiement.
Inventory Last Updated: Feb 05, 2025