AX1800 Dual Band 2.4 & 5Ghz Gigabit Wireless Extender Wifi 6 Repeater 4 Antenna Wi-fi Router Long Range Wlan Signal Amplifer

AX1800 Dual Band 2.4 & 5Ghz Gigabit Wireless Extender Wifi 6 Repeater Powerful 4 Antenna Wi-fi Router Long Range Wlan Signal Amplifer

WL-NE3602 is a 1800Mbps dual-band WiFi6 signal amplifier.

Equipped with 4 high-gain antennas for signal enhancement

Key Features:

• Wi-Fi expands and eliminates dead spots of wireless signals;

•1800Mbps Gigabit Dual Band WiFi6 Repeater Amplifier, 360° Full Coverage;

• 1800Mbps Dual Band 2.4G/5GHz: Connect to both 2.4GHz and 5GHz Wi-Fi bands for faster and more stable internet speeds;

• 802.11AX Gigabit Wireless Extender: The latest Wi-Fi standard ensures lightning-fast internet speeds and reliable connectivity;

• Wired Transfer Rate 10/100/1000Mbps: Connect to your internet source with high-speed wired internet for faster and more reliable internet speeds;

• • Wireless Repeater :Repeat your existing Wi-Fi signal to provide coverage in hard-to-reach areas. More compatible with WiFi6 home routing;

• 4 antenna signal enhancement, signal coverage and wall penetration are significantly improved;

• The antenna can be flexibly rotated, and the user can adjust the antenna angle to adjust the signal transmission and reception;

• Support Wi-Fi to wired, can be connected to TV, computer, etc. to connect to wired and work stably;

• With various modes, you can either use it as a regular extender/AP ;

• The WiFi 6 MU-MIMO and OFDMA techniques have largely improved the device efficiency and performance.

• Scientific heat dissipation design, the device supports 24h stable work without disconnection, avoiding overheating and aging of components

Specification:

Model WL-NE3602;

Support IEEE802.11a/b/g/n/ac/ax standard;

Memory: 128MB; Flash: 16MB;

Maximum transmit power: 200mW (≈23dBm);

Maximum receive sensitivity: -96dBm Operating

frequency: 802.11b/g/n: 2.412GHz-2.472GHz; 802.11ax/ac/an/a:

5.180GHz- 5.825GHz

1*10/100/1000Mbps RJ45 WAN/LAN Ethernet port;

RESET and WPS share 1 key;

2.4GHz: 574Mbps; 5.8GHz: 1201Mbps

Antenna gain: 4*2dbi external antenna

Power parameters :100~240V, 50/60Hz

Maximum power consumption : ＜15W

Support AP, relay, routing mode;

Need the WiFi signal is amplified, select the repeater mode;

Analog router use, selectable routing mode;

The repeater is too far from the main route, choose AP mode;

Packing list:

1*WL-NE3602 WiFi 6 Router Repeater

1*Network cable

1*Instruction manual

Wi-Fi6: The new generation of WiFi

Tri-Core CPU: High-performance processing without delay

1800Mbps: Dual-band / high-speed

Gigabit port: Fully use of the bandwidth

OFDMA: Data transmission for multiple devices

WPA3 Encrypt: Safer and more secure than WPA2

Signal Wall-through: 4 pieces high gain antennas

Multi-functions: Supports AP/Repeater/Router Mode

1800Mbps Dual-band WiFi Speed

With the 802.11AX technology, CF-XR182 can easily extend the WiFi range for your gigabit dual-band WiFi router,providing an enjoyable WiFi experience.

PS: In theory, 1800Mbps (2 4GHz 600Mbps + 5.8GHz 1201Mbps)

WiFi6 VS WiFi5 ,Al-aspect Improvement

Speed up to 1800Mbps, no dropping, no stuck

Where Will You Need a COMFAST Repeater

1、The big house that one WiFi router can't cover all area

Usually, A WiFi router can cover 70 square meters area ofyour house, you can add a CF-XR182 to extend the WiFi coverage.

2、Multi-layer house, long distance between upstairs and downstairs a CF-XR182 can provide a stable and reliable WiFi signal no matter where you are.

3、Extend the WiFi of your neighbor

CF-XR182 can extend the WiFi range of your neighbor who is away on a business trip.

4 High Gain Antennas

Good Signal in Long Distance

Designed with 4 Omni-directional antennas for better performance of wall-through and anti-interference, also for wider WiFi coverage and faster data trans-receive speed.

PS: The antennas are an advertising effect drawing,and the internal structure is not fully displayed. Please refer to the real object.

Effective Heat Dissipation

Longer Lifespan

The heat sink hole design can keep the WiFi repeater away from the components aging and unstable operation caused by high heat.

All Gigabit Ethernet Port

Equipped with a gigabit Ethernet RJ45 WAN/L AN port,which can make full use of the bandwidth from most ISP.

Plug and Play after first setting

Multiple Mode for Different Situation

01.Repeater Mode (wireless to wireless)

Extend the main router's WiFi signal to every corner of the house

02.AP/Router Mode (Wired to Wireless)

Wired connection between the main WiFi router and WiFi repeater

03.Wireless to Wired

CF-XR182 has an RJ45 Ethernet port supporting

a wired connection with the desktop or laptop.