COMFAST 4W Dual Channel Signal Drone Booster 2.4GHz 5.8Ghz Channel Signal Booster Amplifier High Power for Drone Wifi Router

COMFAST 4W Dual Channel Signal Drone Booster 2.4GHz 5.8Ghz Channel Signal Booster Amplifier High Power for Drone Wifi Router

SPECIFICATIONS

Brand Name: COMFAST

With Modem Function: No

Hign-concerned Chemical: none

Type: WireLess

Wi-Fi Supported Frequency: 2.4G

5G Wi-Fi Transmission Rate: None

2.4G Wi-Fi Transmission Rate: 300 Mbps

Function: VPN

Function: Firewall

Certification: CE

Number of USB Interfaces: None

Max. LAN Data Rate: 100Mbps

Standards And Protocols: Wi-Fi 802.11n

Wi-Fi Transmission Standard: 802.11n

Wired Transfer Rate: 10/100Mbps

Package: Yes

Supports WDS: No

LAN Ports: 0

Supports WPS: Yes

Application: Soho

Products Status: Stock

Wireless: Wired

Feature 1: Broadband Amplifier router

Feature 2: Dual frequency wifi signal booster

wifi signal booster: Drone signal booster

Drone signal booster extender: Remote Control booster

Remote Control Booster: 5W WiFi Booster

WiFi Booster: 2.4GHz Wifi Power Signal Amplifier

5GHz Wifi Power Signal Amplifier: 5GHz Power Signal Amplifier

Dual Wireless Remote Control: Dual Channel Remote Control Booster

Dual Channel Range Extend BOOSTER: Dual Channel Remote Control Long Range Extender

Choice: yes

semi_Choice: yes

WiFi Power Booster 4W Dual Channel Signal Drone Booster 2.4GHz 5.8Ghz Channel Signal Booster Amplifier High Power for Drone Wifi Router

Difference:

HS2420     2.4Ghz  2.4Ghz

HS2458     5.8Ghz  2.4Ghz

HS5805 5.8Ghz  5.8Ghz

Description:

They are designed for IEEE 802. 11b/g/n Wireless LAN applications. They adopt the direct sequence spread spectrum (DSSS) and orthogonal frequency division multiplexing (OFDM) technology of WAN communication. They are compatible with time division duplexing (TDD) method of WL AN and using rapid microwave detection technology to provide high linearity amplification. The signal boosters can work with most WL AN/Wi-Fi devices and increase the WLAN signal strength, therefore a larger WL AN coverage and more stable transmission rate.

Option 1: 2.4Ghz + 2.4Ghz

Key Features:

1.2.5dB ultra-low noise.

2.Dual inputs and dual outputs.

3.5V to 16V operating input range.

4.Working with certified IEEE 802.11b/g/n Wireless LAN devices.

5.Simply plug and play, no software is required.

6.50X the power, improving the link quality and coverage of certified WLAN devices.

7.Low weight, the weight of the amplifier board is only 100g, which is very suitable for use on drones.

8.Supports three types of power supply: 12V/1A power supply, 5V portable charger (power bank) and battery. You can choose the suitable power supply according to your needs.

2.4GHz Channel Parameters Specifications:

1.Frequency Range :2400-2500MHz

2.Operating Voltage :5-16V

3.Receiving Gain :18dB±1

4.Transmission Gain: 18dB±1

5.Max Output Power(P1dB) :36dBm(4W)

6.Input Trigger Power :Min:3dBm Max:23dBm

7.EVM :3%@28dBm 802.11g 54Mbps OFDM 64QAM BW 20MHz

8.Noise Figure :＜2.5dB

9.Current Supply :580mA@Pout 28dBm 12V

10.TX/RX Switch Time Delay :＜1 us

11.LED Indicator :Transmitter: Green; Receiver: red

12.Operating Temperature :-30℃～+70℃

13.Storage Temperature :-40℃～+150℃

14.Operating Humidity :Up to 95% rel. humidity

15.RF Connector :Input: SMA-K; Output: RP-SMA-K

16.Power Socket :2.5*0.7mm DC

17.Shell Size :65*61*12(mm)

18.Shell Material :Aluminum

19.LED indicator status: transmit: green; receive: red; send/receive switching: orange-yellow (composite color of green and red)

Installation Instructions:

Step 1: Remove the power supply of the wireless AP/Router

Step 2: Remove the antenna of the wireless AP/Router

Step 3: Connect the antenna of the wireless AP/Router to the RFIN of the bi-directional amplifier with the standard RG316 feeder cable.

Step 4: Screw the antenna to the RFOUT port of the bi-directional amplifier.

Step 5: Power up the bi-directional amplifier and then power up the wireless AP/Router.

 

 

Package include:

1x Dual Channel Signal Booster

Attentions:

1. Heat dissipation is recommended, such as adding heat sink or radiator fan.

2. Antenna should be screwed first, then plug the power adapter, finally connect the device.

3.The output could reach 36dBm, when input power is 18dBm or 19dBm (default gain is 18dB).

 

 

Option 2: 2.4Ghz + 5.8Ghz

Features:

*3.0dB ultra-low noise.

*Dual inputs and dual outputs.

*5V to 16V operating input range.

*Working with certified IEEE 802.11a/n Wireless LAN devices.

*Simply plug and play, no software is required.

*80X the power, improving the link quality and coverage of certified WLAN devices.

*Low weight, the weight of the amplifier board is only 100g, which is very suitable for use on drones and other devices.

*Supports three types of power supply: 12V/1A power supply, 5V portable charger (power bank) and battery. You can choose the suitable power supply according to your needs.

 

Specifications:

5.8GHz Channel Parameters:

 

1.Frequency Range :5725-5850MHz

2.Operating Voltage :5-16V

3.Receiving Gain :16dB±1

4.Transmission Gain: 18dB±1

5.Max Output Power(P1dB) :36dBm(4W)

6.Input Trigger Power :Min:3dBm Max:20dBm

7.EVM :3%@28dBm 802.11a 54Mbps OFDM 64QAM BW 20MHz

8.Noise Figure :＜3.0dB

9.Current Supply :485mA@Pout 28dBm 12V

10.TX/RX Switch Time Delay :＜1 us

11.LED Indicator :Transmitter: Green; Receiver: red

12.RF Connector :Input: SMA-K; Output: RP-SMA-K

2.4GHz Channel Parameters:

1.Frequency Range :2400-2500MHz

2.Operating Voltage :5-16V

3.Receiving Gain :16dB±1

4.Transmission Gain: 18dB±1

5.Max Output Power(P1dB) :36dBm(4W)

6.Input Trigger Power :Min:3dBm Max:20dBm

7.EVM :3%@28dBm 802.11a 54Mbps OFDM 64QAM BW 20MHz

8.Noise Figure :＜3.0dB9

9.Current Supply :485mA@Pout 28dBm 12V

10.TX/RX Switch Time Delay :＜1 us

11.LED Indicator :Transmitter: Green; Receiver: red

12.RF Connector :Input: SMA-K; Output: RP-SMA-K

13.Storage Temperature :-40℃～+150℃

14.Operating Humidity :Up to 95% rel. humidity

15.Operating Temperature :-30℃～+70℃

16.Power Socket :2.5*0.7mm DC( default )

17.Shell Size :65*61*12(mm)

18.Shell Material :Aluminum

19.Net Weight :0.12Kg

 

Option 3: 5.8Ghz + 5.8Ghz

Features:

*3.0dB ultra-low noise.

*Dual inputs and dual outputs.

*5V to 16V operating input range.

*Working with certified IEEE 802.11a/n Wireless LAN devices.

*Simply plug and play, no software is required.

*80X the power, improving the link quality and coverage of certified WLAN devices.

*Low weight, the weight of the amplifier board is only 100g, which is very suitable for use on drones and other devices.

*Supports three types of power supply: 12V/1A power supply, 5V portable charger (power bank) and battery. You can choose the suitable power supply according to your needs.

Specifications:

5.8GHz Channel Parameters:

1.Frequency Range :5725-5850MHz

2.Operating Voltage :5-16V

3.Receiving Gain :16dB±1

4.Transmission Gain: 18dB±1

5.Max Output Power(P1dB) :36dBm(4W)

6.Input Trigger Power :Min:3dBm Max:20dBm

7.EVM :3%@28dBm 802.11a 54Mbps OFDM 64QAM BW 20MHz

8.Noise Figure :＜3.0dB

9.Current Supply :485mA@Pout 28dBm 12V

10.TX/RX Switch Time Delay :＜1 us

11.LED Indicator :Transmitter: Green; Receiver: red

12.Operating Temperature : -30℃～+70℃

13.Storage Temperature : -40℃～+150℃

14.Operating Humidity :Up to 95% rel. humidity

15.RF Connector :Input: SMA-K; Output: RP-SMA-K

16.Power Socket :2.5*0.7mm DC( default )

17.Shell Size :65*61*12(mm)

18.Shell Material :Aluminum

19.Net Weight ：0.12Kg